The app that most all the girls on my team use is Myfitnesspal and I do feel very accustomed to it at this point, and have even done a blog post about how to use it in detail at THIS link, however I do think there are a lot of other apps out there that are super useful so I wanted to let you know about those as well as give you places to go to figure out how to use those in more detail if you so choose. 
The total number of relays, cam timers and drum sequencers can number into the hundreds or even thousands in some factories. Early programming techniques and languages were needed to make such systems manageable, one of the first being ladder logic, where diagrams of the interconnected relays resembled the rungs of a ladder. Special computers called programmable logic controllers were later designed to replace these collections of hardware with a single, more easily re-programmed unit.
Another programmer went to great lengths to conceal the contours of his fully automated $50,000 per year job from his boss. Management could check in on his computer screen via the network, so he ran a loop of prerecorded video to hide the fact that he wasn’t actually working. In his advice-seeking post, Etherable wrote, “It doesn’t feel like I’m doing the right thing.”

Relay logic was introduced with factory electrification, which underwent rapid adaption from 1900 though the 1920s. Central electric power stations were also undergoing rapid growth and operation of new high pressure boilers, steam turbines and electrical substations created a large demand for instruments and controls. Central control rooms became common in the 1920s, but as late as the early 1930s, most process control was on-off. Operators typically monitored charts drawn by recorders that plotted data from instruments. To make corrections, operators manually opened or closed valves or turned switches on or off. Control rooms also used color coded lights to send signals to workers in the plant to manually make certain changes.[25]
Set schedules are helpful, but many of us keep different hours from day to day. Energy costs can be even further reduced by programming “macros” into the system and controlling it remotely whenever needed. In other words, you could set up a “coming home” event that turns on lights and heating as you’re driving home after work, for example, and activate it all with one tap on your smartphone. An opposite “leaving home” event could save you from wasting energy on forgotten lights and appliances once you’ve left for the day.
Worst case, your testers spend all day maintaining the automation false failures, adjusting the test code to match the current system, and rerunning them. This might have some marginal value, but it is incredibly expensive, and valuable only when the programmers are making changes that routinely cause real failure. But that's a problem you need to fix, not cover up with the Band-Aid of testing tools.
“I see it as a grassroots effort by office workers and others who use a computer as part of their job,” Al Sweigart, the author of Automate the Boring Stuff With Python, told me in an email. Even those with little or no familiarity with programming are now seeking out his work, driven by the ease of automating modern jobs. “I get emails from readers who tell me that they’ve freed up several hours of their (and their coworkers’) days with a collection of small programs,” Sweigart writes.
Here’s the real news of the 2018 midterm elections. One week out, Democrats appear poised to win big on two of the three big playing fields. They were never going to retake the Senate, if only because of the mix of seats up for election this year—10 of those held by Democrats are in states Donald Trump carried in 2016. But in the House of Representatives and in state houses around the country, Democrats are on the verge of scoring huge victories. Given the underlying economic reality, that’s entirely unexpected.
Protect your home and family and enjoy a Protect your home and family and enjoy a hands-free voice-controlled speaker with a great audio experience at the same time. Introducing the First Alert Onelink Safe & Sound the first-ever smart smoke and carbon monoxide alarm with Alexa Voice Services enabled so you can enjoy the full suite of features ...  More + Product Details Close
TestComplete by SmartBear is a powerful commercial testing tool for web, mobile, and desktop testing. TestComplete supports various scripting languages such as JavaScript, VBScript, Python, and C++Script. Like Katalon Studio, testers can perform keyword-driven and data-driven testing with TestComplete. The tool also offers an easy-to-use record and playback feature.
Katalon Studio is a powerful test automation solution for mobile, Web, and API testing. And it is completely FREE! It provides a comprehensive set of features for test automation, including recording actions, creating test cases, generating test scripts, executing tests, reporting results, and integrating with many other tools in the software development lifecycle.

A vacuuming robot isn't enough these days. Don't you want your floors mopped clean as well? iRobot's relatively inexpensive Braava Jet 240 will do exactly that. It's small, quiet, and perfect for apartment dwellers without a lot of floor space or time to clean it when they get home. It sprays a jet of water to clean deep, and can even do damp sweeping, like a Swiffer.


The recently released World Quality Report 2017–2018 by Capgemini, Sogeti, and Micro Focus points out several interesting trends in software quality and testing. Two of three key trends are increasing test automation and widespread adoption of agile and DevOps methodologies. As the report shows, organizations need intelligent automation and smart analytics to speed up decision making and validation and to better address the challenges of testing smarter devices and products that are highly integrated and continuously changing. The report also suggests the need of smart test platforms that are self-aware and self-adaptive to support the complete application lifecycle.
Automation frameworks provide guidelines to achieve beneficial results from test automation tools and automated testing activity. They establish a universal standard for testers to achieve the specific goals of the automated tests. The framework should be easy to maintain and easy to change. Consider dedicating the role of framework design and development to a dedicated, qualified tester. A poorly designed — or hard to maintain — framework causes problems even if you are using the right automation software tools. Poor planning and the failure to create or select the appropriate framework to guide test automation activity limits the benefits of automating tests.
Two factors had a statistically significant relationship with satisfaction. The first was having good selection criteria and the second was the inclusion of key functions in the RPA project planning and execution.  Including representatives from information management, the target functions and especially HR (See Figure 3) is positively correlated with project satisfaction. According to Lyke-Ho-Gland, “HR is often included in organizations’ RPA steering committees, not only to allay fears and create buy-in but to create action plans and training for displaced FTEs. Ultimately this helps organizations use RPA as an opportunity to build capacity for sustainable growth rather than simply reducing costs.”
Installing thousands of bots has taken a lot longer and is more complex and costly than most organizations have hoped it would be, Edlich and Sohoni say. The platforms on which bots interact often change, and the necessary flexibility isn’t always configured into the bot. Moreover, a new regulation requiring minor changes to an application form could throw off months of work in the back office on a bot that’s nearing completion.
Normally, customers reach out to your company with an issue. They must explain the issue to every person they encounter, and the response time can vary widely. It is difficult to track where the problems initiate and whether the patterns could be systemic. Your customers’ ability to find a solutions usually depends on the knowledge of the team member they reach.
Steve Pritchard is a Marketing Consultant for dreambooth, a company that provides interactive photo booths for special events. He says, "Photo booths have become very popular features for both parties and corporate events in recent years, so to cope with the sudden influx of orders, we have massively streamlined the process by automating the sales,” he explains. “Aside from being more cost-effective, it provides a smoother and more efficient method of processing sales than doing it manually. Because this automation process helps to speed up the order process, more orders than ever pour in. This means we’re able to create more jobs and hire more people. "
Normally, customers reach out to your company with an issue. They must explain the issue to every person they encounter, and the response time can vary widely. It is difficult to track where the problems initiate and whether the patterns could be systemic. Your customers’ ability to find a solutions usually depends on the knowledge of the team member they reach.
The Obama White House has pointed out that every 3 months "about 6 percent of jobs in the economy are destroyed by shrinking or closing businesses, while a slightly larger percentage of jobs are added".[98] A recent MIT economics study of automation in the United States from 1990 to 2007 found that there may be a negative impact on employment and wages when robots are introduced to an industry. When one robot is added per one thousand workers, the employment to population ratio decreases between 0.18–0.34 percentages and wages are reduced by 0.25–0.5 percentage points. During the time period studied, the US did not have many robots in the economy which restricts the impact of automation. However, automation is expected to triple (conservative estimate) or quadruple (generous estimate) leading these numbers to become substantially higher.[99]
The total number of relays, cam timers and drum sequencers can number into the hundreds or even thousands in some factories. Early programming techniques and languages were needed to make such systems manageable, one of the first being ladder logic, where diagrams of the interconnected relays resembled the rungs of a ladder. Special computers called programmable logic controllers were later designed to replace these collections of hardware with a single, more easily re-programmed unit.
Negative feedback is widely used as a means of automatic control to achieve a constant operating level for a system. A common example of a feedback control system is the thermostat used in modern buildings to control room temperature. In this device, a decrease in room temperature causes an electrical switch to close, thus turning on the heating unit. As room temperature rises, the switch opens and the heat supply is turned off. The thermostat can be set to turn on the heating unit at any particular set point.
The TETware is the Test Execution Management Systems which allows you to do the test administration, sequencing of test, reporting of the test result in the standard format (IEEE Std 1003.3 1991) and this tools is supports both UNIX as well as 32-bit Microsoft Windows operating systems, so portability of this is with test cases you developed. The TETware tools allow testers to work on a single, standard, test harness, which helps you to deliver software projects on time. This is easily available for download on ftp download.
#2: Higher Employee Satisfaction – Anyone that’s ever held a position as an intern knows that menial, robotic tasks are extremely bad for motivation & enjoyment of work. No matter how you look at it, no one’s going to enjoy doing grunt work all day. If such things can be automated, both you (see point #1) and your employees will be happier (doing more meaningful work).
The special-counsel office’s attention to this scheme and its decision to release a rare statement about it indicates the seriousness with which the team is taking the purported plot to discredit Mueller in the middle of an ongoing investigation. Carr confirmed that the allegations were brought to the office’s attention by several journalists, who were contacted by a woman who identified herself as Lorraine Parsons. Another woman, Jennifer Taub, contacted Mueller's office earlier this month with similar information.
What to automate, when to automate, or even whether one really needs automation are crucial decisions which the testing (or development) team must make.[3] A multi-vocal literature review of 52 practitioner and 26 academic sources found that five main factors to consider in test automation decision are: 1) System Under Test (SUT), 2) the types and numbers of tests, 3) test-tool, 4) human and organizational topics, and 5) cross-cutting factors. The most frequent individual factors identified in the study were: need for regression testing, economic factors, and maturity of SUT.[4]

But if the company had one shared test environment where changes needed to be negotiated through change control, that might not actually save any time. We'd have a big, fat bottleneck in front of testing. As Tanya Kravtsov pointed out recently in her presentation at TestBash New York, automating the thing that is not the bottleneck creates the illusion of speed but does not actually improve speed.


Get to know your grocery store. Local store put out flyers advertising each week’s specials. Becoming a “store member” can sometimes get you discounts, as can clipping coupons or finding them online. Try to shop around the perimeter of the store—where you’ll find meats, produce and seafood—rather than in the aisles, where you’ll find mostly packaged and processed foods.
Summary: Provides visibility into the testing process with capabilities to manage, organize and report on tests. SmartBear QAComplete offers out-of-the-box templates or custom workflow options, defect logging, the ability to trace tests to user stories and reusability across the testing cycle. It also integrates with tools like Jira, Selenium and SoapUI.
Worst case, your testers spend all day maintaining the automation false failures, adjusting the test code to match the current system, and rerunning them. This might have some marginal value, but it is incredibly expensive, and valuable only when the programmers are making changes that routinely cause real failure. But that's a problem you need to fix, not cover up with the Band-Aid of testing tools.
The food retail industry has started to apply automation to the ordering process; McDonald's has introduced touch screen ordering and payment systems in many of its restaurants, reducing the need for as many cashier employees.[64] The University of Texas at Austin has introduced fully automated cafe retail locations.[65] Some Cafes and restaurants have utilized mobile and tablet "apps" to make the ordering process more efficient by customers ordering and paying on their device.[66] Some restaurants have automated food delivery to customers tables using a Conveyor belt system. The use of robots is sometimes employed to replace waiting staff.[67]

At present things may look simple and clean as both side setups are being done and all is fine. We have seen on numerous occasions that when a project enters the maintenance phase the project is moved to another team, and they end up debugging such scripts where the actual test is very simple but the script fails due to a 3rd party software problem.


Another example is automation in human resources (HR). You can automate the recruitment and employee onboarding processes. In many companies, job descriptions and applications are not stored in a central location, while the screening and interviewing process is based on your current employees’ accountability, meaning that the process may be inconsistent and could open up your business to possible hiring bias. Onboarding can also vary among employees.
There is a section of testing tools that should be addressed but is too varied to fit under one category. Test automation assumes the latest version of the application is installed on the computer or web server. It still needs to be compiled and installed, the automation needs to be started, and someone needs to be informed to check the results. All of these secondary tasks fall into support -- and they can all be automated. Continuous integration tools are support tools that notice a check-in of new code, perform a build, create a new virtual web server (or update a staging server), push the new code to the target machine, run the automation to exercise the program, examine the results, and email relevant team members about failure.
During my three years at Socialtext, I helped maintain a test tooling system through a user interface that was advanced for its time. O'Reilly took it as a case study in the book Beautiful Testing. The team at Socialtext uses the same framework today, although it now has several tests running at one time on Amazon's Electric Compute Cloud. Although we had a great deal of GUI-driving tests, we also had developer-facing (unit) and web services (integration) tests, a visual slideshow that testers could watch for every browser, and a strategy to explore by hand for each release. This combination of methods to reduce risk meant we found problems early.
In a traditional environment, testing gets completed at the end of a development cycle. But as more and more companies move toward a DevOps and continuous delivery model in which software is constantly in development and must always be deployment-ready, leaving testing until the end no longer works. That’s where continuous testing comes in — to ensure quality at every stage of development.
The second catalyst for rapid adoption of RPA is the success of early pilots and proofs of concept. APQC's latest report, Make Success Automatic: Best Practices in Robotic Process Automation found that over 75% of respondents said their early RPA projects had met or exceeded expectations  (See Figure 2--Note: only 41% of respondents were far enough along to evaluate their satisfaction with RPA projects; Figure 2 includes only their data.)
Summary: Provides a large network of freelancers for any number of testing requirements. Upwork is not a testing-specific community, but it does boast a large network of technology freelancers. With Upwork, companies post a job description, freelancers apply and companies can select a freelancer based on factors like skills, project proposal and pricing.
A report cited in the book found that software developers in the 1990s routinely missed ship dates and deadlines. The pressure to reduce costs and keep up with the demands of a rapidly changing market is now dependent on faster software development. With growth and competition in commercial software development came new technology that changed software forever. The new graphical user interface (GUI), networked personal computers, and the client-server architecture demanded new development and testing tools.
IBM helps clients around the world transform and manage functional and industry-specific processes to achieve intelligent digital operations. These services rely on AI, process automation and advanced analytics to help deliver higher quality processes at lower cost with less risk. IBM process automation services address the four fundamentals of process design.
×